Gilat Satellite Networks
|
Confidential and Proprietary Information
|
57
Parameter
Value Range
Description
LNB Voltage
13V/18V
BDC power voltage.
22kHz Tone
Off/On/Auto
BDC control tone.
LNB (Low Noise Block) in the interface should be understood to
mean BDC (Block Down Converter).
[
Configuring Satellite Settings
You can manage the internal satellite database.
To access and work with Satellite pages:
1. In the IDU Configuration page, click the
Satellite
menu option.
The Satellite Settings
page is displayed.
Figure 59: Satellite Settings
You can perform the following actions on satellites:
Select a satellite to be tracked by the antenna - see page 57
Create a new satellite in the database – see page 58
Edit the parameters of the selected satellite in the database – see page 60
Delete the selected satellite from the database
Upload a satellite database file
Selecting a Satellite to Track
This section describes how to select the satellite to be tracked by the antenna.
To select a satellite to track:
1. Access the Satellite Settings page – see Configuring Satellite Settings, on page 57.
2. From the
Satellite
drop-down list, select a satellite, and click
Select
.
The ACU starts searching the selected satellite.
Once the satellite has been found, the ACU starts tracking it.
