Page 11 of 20
Log Installation
Warning: As with all plastic bags, these bags are not toys and should always be kept
away from children and infants.
1.
Remove logs from packaging.
2.
Place left rear log on rear support.
Ensure that log is firmly positioned and
there is no side to side movement.
(Refer to Figure 11)
3.
Carefully place ember log between
grate and burner.
4.
Place the front of right rear log on the
burner and the back of the log on the
rear log support.
5.
Place the top logs onto the locator
notches. Ensure the logs are secure.
Figure 11
First Firing
Upon completion of the gas fitting line, a small amount of air will be trapped in the gas pipe. When
first lighting the pilot light, it will take a few minutes to purge the trapped air.
Once purging is complete, the pilot and burner will light and will operate as outlined in the instruction
manual. Subsequent lighting of the appliance will not require purging.
When lit for the first time, the appliance will emit a slight odour for an hour or two. This is due to the
paint and lubricants used in the manufacturing process.
Operating Instructions
