33
Operation
Remote Control
Your remote control has been programmed at the factory to operate with your garage door opener.
Up to 12 S 2.0® remote controls can be programmed to the garage door opener. Older remote controls
are NOT compatible, see page 38 for compatible accessories. To program additional accessories refer to the
instructions provided with the accessory. If your vehicle is equipped with a Homelink®, you may require an
external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for
additional information.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN
USING THE DOOR CONTROL
1.
Press the LEARN button on the door control to enter Programming Mode.
2.
Press the LEARN button again, the LED will flash once.
3.
Remote Control: Press the button on the remote control that you wish to operate your garage door.
Keyless Entry: Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry
keypad. Then press the ENTER button.
The garage door opener lights will flash (or two clicks will be heard) when the code has been programmed.
Repeat the steps for programming additional remote controls or keyless entry devices.
The command LED
will flash once.
The command LED will
flash once again.
1
2
OR
PIN
?
?
?
?
4
GHI
5
JKL
7
PRS
8
TUV
9
WXY
0
QZ
*
#
ENTER
0
QZ
*
#
ENTER
6
MNO
3
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL USING THE LEARN
BUTTON
1.
Press and release the LEARN Button on the garage door opener.
2.
Press and hold the button on the remote control that you wish to use. Release the button when the garage
door opener lights blink or two clicks are heard.
“click” “cli
ck”
1
2
LEARN LED
LEARN
Button
