35
Operation
Remote Control
Your remote control has been programmed at the factory to operate with your garage door opener.
Up to 12 S 2.0® remote controls can be programmed to the garage door opener. Older remote
controls are NOT compatible, see page 40 for compatible accessories. To program additional accessories refer
to the instructions provided with the accessory. If your vehicle is equipped with a Homelink®, you may require
an external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for
additional information.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN
USING THE DOOR CONTROL
1.
Press the navigation button below "MENU" to view the Features menu.
2.
Use the navigation buttons to scroll to "PROGRAM".
3.
Select "REMOTE" or "KEYPAD" to program from the program menu.
4.
Remote Control:
Press the button on the remote control that you wish to operate your garage door.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry
keypad. Then press the ENTER button.
The garage door opener lights will flash (or two clicks will be heard) when the code has been programmed.
Repeat the steps above for programming additional remote controls or keyless entry devices. If programming
is unsuccessful, program the remote using the learn button.
1
2
3
OR
PIN
?
?
?
?
4
Press
to continue.
Press
to continue.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL USING THE LEARN
BUTTON
1.
Press and release the LEARN Button on the garage door opener.
2.
Press and hold the button on the remote control that you wish to use. Release the button when the
garage door opener lights blink or two clicks are heard.
“click” “cli
ck”
1
2
LEARN LED
LEARN
Button
Summary of Contents for 87504RGD-267
Page 4: ...4 Tools Needed 3 16 5 32 5 16 7 16 1 2 5 8 9 16 1 4 7 16 Preparation...
Page 46: ...46 Notes...
Page 47: ...47 Notes...
