10
Lamp Head and LED Driver Installation and User Manual
Lyda Lamp Head
Power is supplied directly from the provided LED driver using the specialized lamp cable
provided.
Class II, SELV, 60 VDC maximum, 220 W maximum, 4.2 A maximum.
Note:
For use with the approved power source only.
DMX Adapter
Power is supplied directly from the provided LED driver using a specialized control cable
provided on the DMX Adapter.
The DMX address is set remotely from a compatible RDM controller.
Optical
The Lyda lamp head features 120° beam angle as standard (no lens installed). A 60° medium
beam spread lens is available for field-installation and a 120° flat lens is available in cases
where additional protection is desired for the face of the lamp head. See
for
ordering information and see
for installation instructions.
Heat Dissipation
Product
Watts BTUs
Lyda lamp head
144
491
LED driver (L-DRIVER) 22
75
DMX Adapter (L-DMX) 1
3.4
Radiant Flux
The photosynthetic photon flux of the Lyda lamp head depends on the model ordered:
Model
μmol/s
Lumens
CRI
Lyda Luminaire White + Deep Red LEDs (LYDA WDR)
518
31,300
92.5
Lyda Luminaire 5000K Sun Spectrum LEDs (LYDA 5000)
396
22,000
>95
