Raymarine VCM100, Installation Instructions Manual

Page: 23 / 58

3.6 Digital radar cable extension
If required you can use a Raymarine digital radar extension cable.
D 11687-1 D 11687-2
1
2
1. Extension cable
2. Power and data digital scanner cable (a SeaTalk hs switch or
crossover coupler is also required between this cable and the
display).
Note: For Digital Open Array radar scanners, the power
connections on the power and data digital cable MUST be
connected to the VCM100 Voltage Converter Module (NOT
shown in the diagram above).
Note: The extension cable connects to the radar scanner.
Cables and connections 23