Raymarine ST40, Service Manual

Page: 8 / 70

Part 1 Instrument Disassembly & Assembly
1-2 ST40 Instruments Service Manual 83149-2
(b) At the control-key end of the instrument, gently press one corner of the
screen, at the same time easing-out the edges of the bezel with your
fingers, then repeat the procedure at the adjacent corner, to release that
end of the instrument from the bezel.
ST
40
D4841-4
Do NOT attempt to release this
end of the the bezel until you have
first released the other end.
Always release this
end of the bezel first.
Removing bezel
(c) At the other end of the instrument, ease the top and bottom bezel edges
outwards to unclip them, then withdraw the instrument, from the bezel.
2. Insert the back case removal tool between the front fascia (2) and the back
case (8) as shown, then gently twist the tool to prise the front fascia from the
back cover.
D5039-1
Separating front fascia from back cover
3. Repeat this procedure for each edge of the instrument, until the front fascia
and the back case are completely separated.