Raymarine SmartPilot SPX-10, Installation Instructions Manual

Page: 31 / 50

3.8 SeaTalk connection
The SPX course computer has 2 SeaTalk connectors available. It
is recommended that 1 of these is reserved for connection to the
primary autopilot controller.
Example SeaTalk autopilot
S eaTalk
SMART PILOT
D10468-2
2 3
1
1. SPX course computer
2. Helm position with primary autopilot controller (on dedicated
SeaTalk connection)
3. Helm position with secondary autopilot controller and
instrument(s)
SPX to SeaTalk connection
Use a SeaTalk cable. Depending upon the SeaTalk cable obtained,
you may need to remove the connector from one end to reveal the
cable cores.
SeaTalk
D10459-2
Rayma rine
P OWER
P OWER
P
O
W
E
R
12V
OFF ON
24V
FLUXGATE RUDDER
CLUTCH
FAULT
S LEEP
FAULT
3
1 2
Connection colors
Color Description
1 Grey 0 V (-ve)
2 Red +12 V SeaTalk power out
3 Yellow SeaTalk data
SeaTalk connection rules
The SeaTalk connections into the course computer depend upon
the physical system configuration.
Cables and connections 31