Raymarine SmartPilot S1000, User Manual

Page: 35 / 40

User Guide 35
Safety Notices
In-line power switch
Should you need to power off the autopilot quickly, use the in-line power
switch.
Product installation
This equipment must be installed and operated in accordance with the
instructions contained in this handbook. Failure to do so could result in poor
product performance, personal injury and/or damage to your boat.
Before installing the S1000 computer and drive unit, check that they are the
correct voltage for your boat’s supply.
As correct performance of the boat’s steering is critical for safety, we
STRONGLY RECOMMEND that an Authorized Raymarine Service
Representative fits this product.
WARNING: Electrical Safety
Make sure the power supply is switched off before you make
any electrical connections.
WARNING: Calibration
We supply this product calibrated to default settings that
should provide initial stable performance for most boats. To
ensure optimum performance on your boat, you must
complete the AutoLearn procedure as described in Chapter 3.
Press
Power Off
Reset
Twist
D7658-1