38
User Guide
The SmartController will now search for
the basestation, you can press
EXIT
at
any time to stop the search. When a
basestation is found by the
SmartController, check that the yellow
registration light on the basestation is on.
If the yellow light is on, then press
ACCEPT
to complete the registration, the
display will read REGISTER SUCCESSFUL.
Otherwise, press
REJECT
and re-start the
registration procedure
To de-register a handset
At REGISTRATION, press
SELECT
.
If the SmartController is already
registered, then the display will read
REGISTERED TO BASESTATION. Press
DEREG
to continue, or
EXIT
to cancel the
operation.
The SmartController will attempt to
commuicate with the basestation and de-register. When complete, the
display will read HANDSET NOT REGISTERED.
If the SmartController cannot communicate with the basestation then a
“BASE NOT FOUND” message will be displayed. It is still possible to de-
register the SmartController at this point by pressing
SELECT
. To leave
without de-registering, press
EXIT
.
Factory Reset
This option will clear all settings from the SmartController. Press and hold
the
SELECT
key for 2 seconds to activate the reset.
Note:
A reset does not alter the registration status of the SmartController
EXIT
START
REGISTER
HANDSET
CHECK
BASESTATION
POWERED
REJECT
ACCEPT
FOUND
BASESTATION
CHECK
LAMP
EXIT
DEREG
REGISTERED
TO
BASESTATION
81243_1.fm Page 38 Tuesday, December 7, 2004 10:06 AM
