background image

            

Important information

11

D7707-1

EMC conformance

All Raymarine equipment and accessories are designed to the best industry standards for 
use in the recreational marine environment. The design and manufacture of Raymarine 
equipment and accessories conforms to the appropriate Electromagnetic Compatibility 
(EMC) standards, but correct installation is required to ensure that performance is not 
compromised. For full details and installation guidelines refer to our web site at 

www.raymarine.com

Warranty

To register your new Raymarine product, please take a few minutes to fill out the warranty 
card.  It is important that you complete the owner information and return the card to us to 
receive full warranty benefits. 

Your product can also be registered via our web site - 

www.raymarine.com

Handbook information

To the best of our knowledge, the information contained in this handbook was correct as it 
went to press. Raymarine cannot accept any liability for any inaccuracies or omissions it may 
contain.  In addition, our policy of continuous product improvement may change 
specifications without notice. As a result, Raymarine cannot accept liability for any 
differences between the product and the handbook.

Disposal of this product

Disposal of this product should be in accordance with local regulations.

81253_1.book  Page 11  Monday, May 9, 2005  9:36 AM

Summary of Contents for SeaTalk2













Reviews: