– choose mounting positions that are at least 300 mm (12 inches) below the water line.
• Transducers should be installed in a location where there is sufficient clearance inside the hull to
fit the nut and have at least 100 mm (4 in) of headroom to allow for withdrawal.
• To avoid interference with the internal magnetometer, mount transducers at least 1 m (39 inches)
from other electrical devices.
Transducer dimensions — RV-2xx
All transducers in the RV-2xx series have the same external dimensions.
Dimension
Measurement
A
72.7mm (2.86 in.)
B
60.0 mm (2.36 in.)
C
85.0 mm (3.35 in.)
D
8.0 mm (0.31 in.)
E
80.0 mm (3.15 in.)
F
30.1 mm (1.19 in.)
G
109.0 mm (4.29 in.)
H
308.0 mm (12.13 in.)
I
105.3 mm (4.15 in.)
•
RV-200
attached cable length: 8 m (26.2 ft).
•
RV-212(P/S)
and
RV-220(P/S)
attached cable length: 2 m (6.5 ft).
Mounting — RV-2xx bronze thru-hull
This procedure applies to all transducers in the RV-2xx series.
The following procedure should only be performed with your vessel out of the water.
10
