background image

6

RS125 GPS Receiver

SOG/COG filter....

The integral SOG/COG filter fitted to your RS125 compensates for the oscillating motion of 
your boat to give a clearer indication of the boat's course and speed.

Slow moving boats, or boats sailing in rough seas will benefit from a high filter setting, 
whereas a powerboat that can quickly change speed and direction will benefit from a low 
setting.

The default setting for your RS125 is MEDIUM.

Adjustment of the SOG/COG filter is made from your system display.
For full details of how to adjust the SOG/COG filter refer to the relevant Manufacturer's 
manual.

Accessories....

You can obtain the following accessories to help you quickly and easily connect your RS125 
to existing equipment:

E36013 - 600mm Antenna conversion cable

E36014 - 1000mm Display conversion cable

D7687_2

Flashing RED

Unit is in bootcode, either being upgraded
or unable to boot.

Flashing ORANGE

Unit is running, but does not have a fix.

Flashing GREEN

Unit is running and has a fix.
1 flash every 2 seconds indicates NMEA connection.
1 flash every 4 seconds indicates SeaTalk connection.

What do the lights mean?....

The display conversion cable enables you to 
quickly connect your RS125 receiver to an 
existing RC425 or RC420 display, saving time 
and trouble.

The antenna conversion cable enables you to 
connect your RS125 receiver to an existing 
RS120, RS112 or RS114 cable, saving the time 
and trouble of running a new cable.

81247_4.fm  Page 6  Monday, September 15, 2008  4:58 PM

Summary of Contents for Raystar 125









Reviews: