86052_3
CSR 50°50^05W BRG 309°T
POS 001°06^00W COG 37.84nm
128nm
GOTO
ROUTE
SCREEN
FIND SHIP
TOPSHAM
EXETER
TEIGNMOUTH
EXMOUTH
TORQUAY
DARTMOUTH
PLYMOUTH
ENPORT
SALCOMBE
PORTLAND
HARBOUR
ISLE O
TRACKPAD
Controls cursor position on the screen, and also the sliders,
setup options and text entry.
Hold the trackpad down to move the cursor rapidly.
CLEAR
Cancels operation in progress and returns to the
previous display.
POWER
Press and hold to switch on display.
Press for 3 seconds to turn off display.
POWER
Press momentarily to access lighting and contrast.
RANGE
Controls range scale.
Range scale is shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale rapidly.
ENTER
Press to confirm selection and (if appropriate) clear
current soft key labels. It performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, cursor takes control
of the object.
When arrow-head cursor symbol is displayed, the
object under cursor control is dropped.
DISPLAY
Controls display mode pages.
- Press repeatedly to toggle through display modes.
- Press and hold for 2 seconds for chart display.
See over for display modes.
Note:
Where multiple pages are available, use associated
soft keys to display.
MARKS/MOB
Controls placing waypoints and Man Overboard function.
- Press to access Waypoint soft keys; use soft keys to Place
Waypoint at cursor or vessel position. Press
ENTER
to finish.
- Press and hold for 2 seconds to activate or cancel MOB.
MENU
Provides access to setup options.
Bridge Card -
Raychart 320 Chartplotter
ALARMS
Use to set up alarm parameters.
- Press for display alarm list.
- Use Trackpad to select alarm.
- Use up down soft keys to set alarm limits.
- Press
ENTER
to finish
ALARMS SET UP
ARRIVAL ALARM
OFF TRACK ALARM
ANCHOR ALARM
COUNTDOWN TIMER
ALARM CLOCK
0.01nm
ON
OFF
00:10:00
OFF
ALARM
OFF ON
SELECT DISTANCE
SYSTEM
SET UP¬
CHART
SET UP¬
TRACK
SET UP¬
GPS
SET UP¬
Press soft key to display required setup menu, then use
trackpad to select option and soft key to change setting.
Press
ENTER
to close menu and
CLEAR
to finish.
Select a slider using the soft key or trackpad left/right.
Adjust slider using trackpad up/down.
Press
ENTER
to finish.
LIGHT
CONTRAST
O
F
F
50%
Soft keys
Press to select option, or to highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft key
leads to a further display of soft key options.
D5834-1
OFF
