5. Apply heat evenly over the heat shrink tubes until they are shrunk uniformly and resemble the
shape of the connectors.
4.10 Wireless hub connection
The Wireless hub connects directly to the Ray90 / Ray91’s Hub connection.
The Wireless hub is required to allow connection of wireless handset stations to the Ray90 / Ray91
base station.
4.11 Wireless handset charging holster – power connection
To enable inductive charging of the wireless handset, the holster requires a 12 V dc power supply.
The power cables should be connected via a distribution panel or, if required directly to a battery.
Refer to the
section for guidance on connecting to a power supply.
60
