Raymarine Ray215, Owner'S Handbook Manual

Page: 78 / 134

4-27 Operation with a Full Function Handset
4. When GROUP appears, press the ENT key. GrP appears on the 7-
segment display and the registered Group MMSI number appears on
the dot matrix display.
INDV ENT
Only appears if Group
MMSI number is set up
via DSC Operation in
Menu Mode
Group MMSI number
Note: Since only one group MMSI number can be registered at a time,
only one MMSI number can be displayed when GROUP is selected. To
change the group MMSI number, see section 4.5.3.4.
5. Press ENT to accept the MMSI number.
6. Use the SQ UP/DOWN key to select the Working Channel for
communication.
7. When the desired channel number appears, press ENT. The dot matrix
display scrolls between the Working Channel and the Group MMSI
number.
8. If this information is correct, press ENT to accept. A new message
appears, prompting you to press the PTT key.
9. Press PTT. The radio changes over to the selected Working Channel
without waiting for acknowledgment.
ENT ENT
MMSI number
Select Working Chanel
with SQ UP/DOWN key
Scrolls between
Working Chanel and
MMSI number
ENT
PTT