Setup and Calibration
13
5
Setup and Calibration
5.1
Setup and Calibration Organisation
Setup is organised into Chapters, each comprising a number of Pages.
Setup pages use both the top and bottom panes of the display.
The diagram shows the layout of the available chapters and pages.
For a full description of each setup page refer to section 5.4.
5.2
Setup and Calibration Operation
To enter Setup:
Warning:
It is not possible to enter setup mode while the Race Timer
(TMR) or Wind Shift (WND)page is visible. Scroll to the Line Bias (Line)
page in order to enter setup.
From the Line Bias (LiNE) page, press and hold
, the first chapter
title page is displayed.
To change the active chapter:
Press
repeatedly until the desired chapter title page is displayed.
At the end of the chapter cycle, the display returns to the first chapter
title page.
If you are currently on a chapter parameter page, you must return to the
chapter title page before you can move to a new chapter.
To access the setup pages:
Use
to scroll through the pages.
returns to the previous page.
Summary of Contents for Race Master
Page 1: ...Race Master User Guide ...
