5.1 Routine equipment checks
It is recommended that you perform the following routine checks, on a regular basis, to ensure the
correct and reliable operation of your equipment:
• Examine all cables for signs of damage or wear and tear.
• Check that all cables are securely connected.
5.2 Product cleaning
Best cleaning practices.
When cleaning products:
• Switch off power supply.
• Use a clean damp cloth to wipe clean.
• Do NOT use: abrasive, acidic, ammonia, solvent or other chemical based cleaning products.
• Do NOT use a jet wash.
5.3 Cleaning the display screen
A coating is applied to the display screen. This makes it water repellent, and prevents glare. To avoid
damaging this coating, follow this procedure:
1. Switch off the power to the display.
2. Rinse the screen with fresh water to remove all dirt particles and salt deposits.
3. Allow the screen to dry naturally.
4. If any smears remain, very gently wipe the screen with a clean microfibre cleaning cloth.
5.4 Cleaning the display case
The display is a sealed unit and does not require regular cleaning. If it is necessary to clean the
display, follow this basic procedure:
1. Switch off the power to the display.
2. Wipe the case with a clean, lint-free cloth.
3. If necessary, use a mild detergent to remove grease marks.
5.5 Cleaning the sun cover
The supplied sun cover features an adhesive surface. In certain conditions unwanted contaminants
may stick to this surface. To avoid damaging the monitor display, clean the sun cover regularly
following this procedure:
1. Carefully remove the sun cover from the display.
2. Rinse the sun cover with fresh water to remove all dirt particles and salt deposits.
3. Allow the sun cover to dry naturally.
38
