Raymarine P70, User Reference

Page: 46 / 70

Alarm name Alarm type Description Action
SeaTalk fail Safety Alarm Total SeaTalk
data transmission
problem. • Check
connections
for short or
open circuit.
• Check system
for device
fault.
• Pilot drops to
standby and
alarm times
out after 10
seconds.
EEPROM
corruption Safety Alarm A corruption
of critical
configuration
data has
occurred. • Pilot drops to
standby and
alarm times
out after 10
seconds.
No Pilot Safety Alarm The Pilot
controller has lost
communications
with the course
computer;
this alarm is
generated by the
Pilot controller. • Check Seatalk
or Seatalk ng
bus wiring
between SPX
and Pilot
controller.
• Check that
the course
computer is
powered up.
No Compass Safety Alarm Compass is not
connected. • Check
connections
and compass
transducer.
Alarm name Alarm type Description Action
Rate Gyro fault Safety Alarm The gyro sensor
has failed. • Internal
Gyro failure,
investigate
fault and
Consult a
Raymarine
Service Agent.
Current Limit Safety Alarm
Drive overload
current
exceeded.
• Check drive
unit and
connections
for stall or
short circuit
wiring
• Pilot drops to
standby and
alarm times
out after 10
seconds.
Rudder
reference unit
failure Safety Alarm Rudder
Reference
connection has
been lost, or
exceeded it’s
limits.
Rudder reference
transducer has
failed while in
auto. Angle
is more than
50 degrees or
connection to
rudder reference
is lost • Pilot drops to
standby and
alarm times
out after 10
seconds.
46
p70 / p70r Pilot controller User reference