MK II Wheel Drive
11
Attaching the pedestal bracket
Note:
If your wheel is bulkhead or box pedestal mounted, you will need to obtain a bulkhead fitting kit
(part number E15017) from your Raymarine dealer. Fitting instructions are supplied with the kit.
Motor tube location
Depending on the design of your pedestal and any surrounding obstructions, you can mount
the wheel drive in one of two ways:
•
Slot 1 installation
: the standard position uses slot 1 on the back of the wheel drive
(the slot closest to the motor tube) so the motor tube is at the bottom to the right of
the pedestal
•
Slot 2 installation
: the alternative installation uses slot 2 to position the motor
tube at the top to the left of the pedestal
Select the appropriate slot so the motor tube is clear of obstructions.
CAUTION: If you use slot 2 and you have a pedestal-mounted compass, the
drive motor may affect compass readings.
D8899-1
Slot 2 installation:
motor tube at
top left
Slot 1 installation:
motor tube at
bottom right
Slot 1
Slot 2
87063_1.book Page 11 Monday, December 19, 2005 3:22 PM
