5.3 Surface mounting using the Deck mounting kit
The Deck mounting kit (A80437) can be used to surface mount your product.
The Riser and Bracket pieces are not required for this installation.
Ensure that the chosen location meets the product’s location requirements, see
for details.
1. Using the Mounting tray template (87170), drill 4 holes in the mounting surface, plus a 22 mm (7/8
in) hole for the SeaTalkng ® cable.
2. Place the small sealing ring in the groove located on the bottom of the mounting tray.
3. Secure the tray to the mounting surface using the 4 x fixings, supplied.
4. Place the large sealing ring into the groove on the upper side of the Mounting tray.
46
