Audio noise
To minimise audio noise on VHF radio or other audio equipment
it is recommended that a suitable noise filter is installed in the
power cable of the VHF/audio equipment and connections to the
boat’s power supply are made as shown in the following
diagram:
Viewing Angle Considerations
There are several factors to consider prior to installing your new
Raymarine display that could effect the usability of the product.
These are listed in the installation guide supplied with this
product.
Note:
Raymarine strongly recommends you pay close attention
to the viewing angle of displays in the preparation stage of the
installation considering the following....
Contrast and Color
Contrast and Color can be affected by viewing angle. Raymarine
recommends you power your display while you prepare your in-
stallation to see the best mounting angle for all situations (in both
day and night mode).
Night Mode
If you plan to use the display in night mode make sure to enable
the “Red Mode” during the display mounting selection process
as the removal of certain colors when in Night Mode has an
overall effect on viewing angle that needs to be considered.
Max Cable Length
Cable Gauge AWG
0-5 meters
12 AWG
5-10 meters
9 AWG
10-15 meters
7 AWG
15-20 meters
6 AWG
Monitor
Autopilot
Distribution
panel
Boat's
battery
Circuit
breaker
Noise
filter
VHF Radio/
Audio
equipment
