Raymarine E32158, Installation Instructions Manual

Page: 25 / 68

Item Wire color Description
1. Red Power
2. Black Power supply –
2.8 USB connection
The AIS unit includes a Mini-B USB port which provides PC
connectivity. To enable connection of the AIS unit to a PC the USB
drivers, supplied on the software CDROM must be installed on the
PC
The USB port can be used to:
• Use of PC based charting software when connected to AIS.
• Perform software update
Installing USB drivers
Prior to connecting the AIS to A PC the USB drivers must first be
installed. To install follow the steps below:
1. Insert the supplied CDROM and navigate to the USB drivers
folder.
2. Double click on the setup.exe file to launch the installer.
3. Follow the on screen installation instructions to complete
installation.
4. Once installed the AIS unit can be connected to the PC. The
USB drivers will be installed automatically and the AIS will
appear as a new COM port device.
5. Select the AIS COM port and a baud rate of 38400 in PC based
navigation software to make use of the AIS data.
Note: If the USB connection is removed from the PC during
use you must reset the connection before further use. To reset
the connection disconnect then reapply power to the AIS before
closing and re-launching any PC applications using the USB
connection. Finally, reconnect the USB cable between the PC
and AIS unit.
AIS350 Receiver 25