Maintenance and troubleshooting 27
3.3 Resetting the system
Using the reset function will return your DSM400 Digital Sounder
Unit to its factory default values. The reset function also clears
any sonar depth offset and speed and temperature calibrations
that have been set.
To perform a factory reset:
1. On the display, make the
Fishfinder
window active.
2. Press
Menu
.
3. Select
Fishfinder Setup
.
4. Select
DSM Settings.
5. Select
DSM Reset.
6. The message
Reset DSM?
appears.
7. To confirm the reset, select soft key YES
,
or press
OK.
DSM powers OFF and ON, the LED will go from blinking
green to solid orange (1 sec.)., the System Data Alarm will
sound showing that connection to the DSM is lost.
8. Press the ACKNOWLEDGE soft key.
After approximately 10 seconds the DSM will re-acquire
data.
9. To complete the reset, read the warning and press
OK
.
To cancel the reset, either:
Before pressing YES (Step 7 above), either, press NO softkey
,
or,
CLEAR
button. The screen changes to show the Fishfinder
DSM Settings.
Press
CANCEL
three times to return to the fishfinder
application.
DSM400 Installation Guide.book Page 27 Tuesday, November 4, 2008 4:53 PM
www.busse-yachtshop.de | [email protected]