Raymarine Dragonfly Installation And Operation Instructions Manual Download Page 83

Page: 83 / 106

Units set-up

You can specify your preference for the units of measurement that will be used in all applications.

Menu item

Description

Options

Distance Units

The units of measure that will be used in all applications for
the display of all values related to distance.

• Nautical Miles

• NM & m (Nautical miles and meters)

• Statute Miles

• Kilometers

Speed Units

The units of measure that will be used in all applications for
the display of all values related to speed.

• Knots

• MPH (Miles Per Hour)

• KPH (Kilometers Per Hour)

Depth Units

The units of measure that will be used in all applications for
the display of all values related to depth.

• Feet

• Meters

• Fathoms

Temperature Units

The units of measure that will be used in all applications for
the display of all values related to temperature.

• Fahrenheit

• Celsius

Tools & Settings

Summary of Contents for Dragonfly











































































































Search results

Summary of Contents for Dragonfly

Reviews:

Related manuals for Dragonfly

Brands by name

Popular brands

Raymarine Dragonfly, Installation And Operation Instructions Manual

Search results

Summary of Contents for Dragonfly

Reviews:

Related manuals for Dragonfly

Brands by name

Popular brands