3.2 Assembly
Fitting the handle to the base
Once you have unpacked all the items from the box, assemble your ice fishing kit following the
instructions below.
Note:
The battery is supplied already fitted to the base using the battery straps; there is no need to
remove the battery from the base.
1. Insert the handle into the slots in the base.
The handle should click into place.
2. Place the 4 x locking nuts into the relevant slots as shown.
Ensure that the locking nuts are correctly orientated before inserting them in the base. The round
locking part of the nut should face inwards towards the battery.
3. Place a washer over each of the hex bolts.
4. Insert the hex bolts into the sides of the base and tighten using a 3 mm hex wrench (Allen Key).
Installation
