Raymarine C140w, User Reference Handbook, Page: 43 / 222

5.5 Waypoint navigation
Navigating to a waypoint using the WPTS MOB
button
1. Press the WPTS/MOB button.
2. Press the GOTO WAYPOINT OPTIONS softkey.
3. Select the required waypoint from the list.
4. Press the
GOTO WAYPOINT softkey.
Navigating to an existing waypoint selected
on screen
In the chart application:
1. Position the cursor over the required waypoint.
2. Press the
GOTO WAYPOINT softkey.
The chart displays a dashed line from your vessel to the active
waypoint, and navigation commences.
Note: When you arrive at your target waypoint, a message
will appear, and an alarm will sound. To acknowledge the
message and silence the alarm, wait 10 seconds or press
ACKNOWLEDGE .
To stop navigating to a waypoint
1. Press the WPTS/MOB button.
2. Press the GOTO WAYPOINT OPTIONS softkey.
3. Press the STOP GOTO softkey.
4. Alternatively, position the cursor over the active waypoint, and
press the STOP GOTO softkey.
Note: Once navigation is no longer active, the waypoint symbol
returns to its normal unboxed state, and the dashed line between
your boat and the waypoint is removed.
Using waypoints
43