5.1 Service and maintenance
This product contains no user serviceable components. Please refer all maintenance and repair to
authorized Raymarine dealers. Unauthorized repair may affect your warranty.
Warning: High voltage
This product contains high voltage. Do NOT remove covers or attempt to access
internal components, unless specifically instructed in the documentation provided.
Warning: FCC Warning (Part 15.21)
Changes or modifications to this equipment not expressly approved in writing by
Raymarine Incorporated could violate compliance with FCC rules and void the
user’s authority to operate the equipment.
Caution: Sun covers
• If your product is supplied with a sun cover, to protect against the damaging
effects of ultraviolet (UV) light, always fit the sun cover when the product is
not in use.
• To avoid potential loss, sun covers must be removed when travelling at high
speed, whether in water or when the vessel is being towed.
Routine equipment checks
It is recommended that you perform the following routine checks, on a regular basis, to ensure the
correct and reliable operation of your equipment:
• Examine all cables for signs of damage or wear and tear.
• Check that all cables are securely connected.
5.2 Product cleaning
Best cleaning practices.
When cleaning products:
• Switch off power supply.
• Use a clean damp cloth to wipe clean.
• Do NOT use: abrasive, acidic, ammonia, solvent or other chemical based cleaning products.
• Do NOT use a jet wash.
Cleaning the display case
The display is a sealed unit and does not require regular cleaning. If it is necessary to clean the
display, follow this basic procedure:
1. Switch off the power to the display.
2. Wipe the case with a clean, lint-free cloth.
3. If necessary, use a mild detergent to remove grease marks.
Cleaning the display screen
A coating is applied to the display screen. This makes it water repellent, and prevents glare. To avoid
damaging this coating, follow this procedure:
1. Switch off the power to the display.
2. Rinse the screen with fresh water to remove all dirt particles and salt deposits.
3. Allow the screen to dry naturally.
4. If any smears remain, very gently wipe the screen with a clean microfibre cleaning cloth.
48
