Raymarine axiom pro 9 RVX, Installation Instructions Manual

Page: 186 / 360

First power up Limitation on Use acknowledgement
After you have completed the Startup wizard the Limitation on Use (LoU) disclaimer is displayed.
You must read and agree to the terms in order to use your MFD.
Selecting OK means you have accepted the terms of use.
Multiple data sources (MDS)
For MDS to be available all products in the system that use the data sources, must be MDS-compliant.
The system will report any products that are NOT MDS-compliant. It may be possible to
upgrade the software for these products, to make them compliant. Visit the Raymarine website
(
www.raymarine.com ) to obtain the latest software for your products.
If MDS-compliant software is not available for the product and you do NOT want to use the systems
preferred data source, you must remove any non-compliant products from the system. You should
then be able to select your preferred data source.
Note: Once you have completed setting up your preferred data sources, you may be able to add
non-compliant products back into the system.
Data sources menu
When a system includes multiple sources of a data type, such as depth data, the system will choose
the most appropriate source for the data. If you prefer, you can manually select your own data source.
The Data sources menu can be accessed on your Data master MFD, from the Settings menu:
Homescreen > Settings > Network > Data sources.
20