13
HD-ACU with multiswitch and DiSEqC supplier
Power settings
When using DirecTV with a multiswitch and DiSEqC supplier,
the power setting for each of the satellites (DTV101, DTV119,
and DTV110) should be set to 18 V only. This is not the default
setting on theHD-ACU. If you need to change the settings, this
can be achieved in one of two ways:
•
Using the PC program on the Installation CD.
•
Manually change the power setting.
Using the PC program
1. Connect your PC to the HD-ACU.
2. Run the Installation CD.
3. Open the folder named DirecTV with multiswitch and
DiSEqC supplier.
4. Enter Setup Mode.
5. Click View Data. The default settings are loaded.
6. Click Update antenna. The new settings are sent to the
antenna.
7. Click Restart. The antenna is initialized using the new power
settings.
Manually changing the settings
5.
Select the power supplying method
** to the LNB. AUTO is
recommended.
PREV - shows previous method.
SELECT - set the displayed method.
NEXT - shows next method.
6.
Press YES to accept the data.
Press NO to cancel and return to
main set up mode.
D7995_1
POWER : AUTO
PREV SELECT NEXT
D7977_1
SAVE?
YES NO
1.
Press YES to enter set up mode.
2.
Press NEXT twice to enter Edit Sat
Info menu.
3.
Press YES to enter edit menu.
4.
Press NEXT until the power
supplying method screen is
reached.
D7973_1
SETUP MODE?
YES NO
D7974_1
SET SAT PAIR?
PREV YES NEXT
D7983_1
EDIT SAT INFO?
PREV YES NEXT
