0049-1650-001
RMX
– USER GUIDE
1/02/2014
Rev. E
Page 5 of 14
Chapter 2
Installation
This chapter describes how to install the RMX.
Unpacking and Inspecting the Equipment
Unpack the equipment and inspect it for any damage that may have occurred in shipment. If you see
any damage or if items are missing, contact Raymar-Telenetics. Keep the shipping container and
packing material for future shipment.
Site Preparation
When selecting a location to install the RMX, choose a site that:
Is clean, well lit, and free from extremes of temperature, humidity, appreciable shock, and
vibration.
Is within seven feet of a power source that can furnish 90-265VAC/DC or 24-53VDC at 3.5 amps.
Is within 50 feet of the associated data terminal.
Provides at least 36 inches of clearance at the front for operating and maintenance accessibility.
Provides at least 4 inches at the back of the enclosure for interface cable clearance and
unobstructed airflow.
Side and top clearances for rack-mounted equipment are dictated by the rack-cabinet provisions,
but should allow a free flow of cooling air.