0049-0300-XXX MIU/Power Port Series – USER GUIDE
08/04/2010
Rev. A
Page 6 of 26
6. POWER CONNECTIONS
DC Power Jack, 2.0mm –
This standard concentric jack is provided to attach an external power
source in the range of 7 – 16 VAC or 8 – 24 VDC. The 2.0mm Jack connects through a full wave
bridge so either polarity is acceptable from the DC source. The slide switch adjacent to the LED
must be to the right side (Toward the 2.0mm Jack).
DB25, Pin 10 –
A DC voltage may be applied at the 25 pin data connector. DC only with the
positive lead connected to pin 10, and the negative lead connected to Signal Ground on pin 7. This
should be a regulated 5 VDC source. The slide switch adjacent to the LED must be to the left side
(Away from the 2.0mm Jack). Internal jumper JP1 must be on pins 1-2.
Summary of Contents for 2.4 MIU/PowerPort Series
Page 23: ...0049 0300 XXX MIU Power Port Series USER GUIDE 08 04 2010 Rev A Page 19 of 26 ...
Page 24: ...0049 0300 XXX MIU Power Port Series USER GUIDE 08 04 2010 Rev A Page 20 of 26 ...
Page 25: ...0049 0300 XXX MIU Power Port Series USER GUIDE 08 04 2010 Rev A Page 21 of 26 ...
Page 28: ...0049 0300 XXX MIU Power Port Series USER GUIDE 08 04 2010 Rev A Page 24 of 26 NOTES ...
