3 PRODUCT DESCRIPTION
© 2022 RAYLASE GmbH SUPERSCAN IV
MN105-en / v1.0.12
12
3
PRODUCT DESCRIPTION
3.1
Items included, accessories and spare parts
The items included are typically:
Deflection unit
USB stick containing manual, declaration of incorporation and design data
Production log
The product can be expanded with the following optional components:
F-Theta lens
Protective window
Collimator Bracket Set
Collimator
Control card
Adapter card / interface electronics between control card and deflection unit
Software package
3.2
General description
3.2.1
Deflection unit
The deflection unit can be used to deflect a laser beam in the X and Y direction. This results in a two-
dimensional area in which the laser can be directed to any position. This area is referred to as the
processing area. Deflection is performed by two mirrors, each of which is moved by a galvanometer
scanner.
The beam output can be fitted with an optional focusing lens (see page 14, F-Theta lens) or an
optional protective window (see page 14, Protective window).
NOTE
On the input side, the laser beam must be input precisely into the optical axis (see page 32,
Installation).
C1-0 70. 1
Only suitable lasers may be input (see page 19, Signage).
C 1-07 0.2