background image

Technical data 

Chapter 3 

 MN051_v1.0.5 

2-Axis Laser Beam Deflection Units 

11 

TECHNICAL DATA 

This section outlines the common features of all deflection units. For type-specific features, 
refer to the data sheets in the Appendix. The individual data is assigned by the rating plate on 
the deflection unit and by the identification code (

 below, Rating plate code). 

3.1 

Conformity with directives 

The deflection unit conforms to the requirements of the following directives: 

  EU Directive 2004/108/EG or German law on electromagnetic compatibility (EMVG) 

  EU Directive 2002/95/EC or German law on electrical equipment (ElektroG) 

  Directive 2006/42/EC on machinery 

  For details of conformity with other directives, contact RAYLASE. 

3.2 

Rating plate code 

The type designation on the rating plate allows you to assign the deflection unit to the appro-
priate data sheet in the Appendix. The data sheet contains the specific data for the unit. 

 

3.2.1 

SUPERSCAN II 

The following key is used on the label of SUPERSCAN II series. 

Type designation 

SS-II 

 

SUPERSCAN II 

SS-II-LD  

SUPERSCAN II Low Drift 

SS-II-AC  

SUPERSCAN II Auto Calibration 

SS-II-HS  

SUPERSCAN II High Speed 

SS-II-HS-LD 

SUPERSCAN II High Speed, Low Drift 

SS-II-HS-AC 

SUPERSCAN II High Speed, Auto Calibration 

SS-IIE-LD 

SUPERSCAN II Enhanced Low Drift 

SS-IIE-HS 

SUPERSCAN II Enhanced High Speed 

SS-IIE-HS-LD 

SUPERSCAN II Enhanced High Speed, Low Drift 

│   

│  

Apertur [mm]

 

│  │ 

│  │  Coating code     Wavelength [nm] .............  Laser 

│  │  AL               180-700 ...................... UV laser 

│  │  TY               355 .......................... Nd: YAG tripled 

│  │  AG               400-1064 ..................... various 

│  │  AR               488-514 ...................... Argon ions 

│  │  DY               532 .......................... Nd: YAG doubled 

│  │  DY+Y             532 & 1064 ................... various 

│  │  780-980nm        780-980 ...................... LEDs 

│  │  Y+(850-870)      850-870 & 1064 ............... Nd:YAG   

│  │  915+975nm        915 & 975 .................... LEDs 

│  │  975              975 .......................... LEDs 

│  │  Y                1064 ......................... Nd:YAG 

│  │  AU               10600 ........................ CO2 

│  │  C                10600 ........................ CO2 

│  │  │ 

│  │  │  

Tuning/Version

 

│  │  │  LN  Low noise Tuning 

│  │  │  W   Short acceleration time tuning 

│  │  │  Vx  Version 

│  │  │  │ 

│  │  │  │  

Interface type

 

│  │  │  │  Dig1   Digital interface with 25-pin D-SUB connector 

│  │  │  │  Dig2   Digital interface with 9-pin and 25-pin D-SUB connector 

│  │  │  │  An2    Analog interface 

│  │  │  │  │ 

│  │  │  │  │  

Additional or customer code  

└─ └─ └─ └─ └─ └ 
XX-XX[XX]XX XX/X 
 
 

Note: 

In addition to the coatings listed above, all mirrors have a deflection coating for a wave-

length of 633nm. 

Summary of Contents for SUPERSCAN II-10



























Reviews: