User’s guide Ytterbium Pulsed Fiber Laser RFL-P200 Ver.: 1.0
4
1.5
Electrical Safety
(1)
Make sure your product is grounded through the PE line of the AC power cord. The
grounding must be firm and reliable.
WARNING:
Any interruption from the protective earth will electrify
the enclosure, which may result in personal injury.
(2)
If the fuse blows out, replace it with only the same types and ratings. The use of other fuses
or material is prohibited. You can contact Raycus for the information of the fuse.
(3)
Make sure that the correct voltage of the AC power source is used.
CAUTION:
Failure to connect the laser to the correct voltage could
damage the product.
(4)
There are no operator serviceable parts inside, so do not try to remove covers, or electrical
shock may be caused, and warranty will be void.
1.6
Other Safety Rules
(1)
Never look into the laser output port when power is supplied to the laser.
(2)
Avoid using the laser in a dim or darkened environment.
(3)
If this device is used in a manner not specified in this document, the protection provided by
the device may be impaired and the warranty will be voided.
(4)
Do not remove the covers of the laser, or the warranty will be void. All maintenance must be
performed in Raycus or by qualified Raycus personnel.
