Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000XZ
24
combination of TOP WATER OUT and TOP WATER IN is used for the outflow and return of cooling
water from the lower layer of the laser.
4.3 Power Connection
CAUTION:
(1) Before connecting to the AC power supply, please check whether the supplied AC
power supply meets the requirements in Table 1;
(2) Incorrect wiring will cause damage to the laser, so please check whether the power
cord is connected correctly before powering on the laser.
Figure 13 shows the power cord provided by Raycus.
Figure 13 RFL-C20000XZ Laser source power cord
Insert the plug at the end of the power cord into the socket marked "AC INPUT" on the rear panel.
Note that the plug has an anti-reverse connection function. After inserting it, use the lock to lock. The
plug and socket as shown in Figure 14.
