The spooling cable of the new cable reel has a deutsch connector ending. If the existing A2B switch has a different type
of connector, you will need to cut it off and replace by the supplied deutsch connector kit 22TCD1020-01
** The new cable reel is digital. If your existing A2B wiring includes a resistance network, then switch the
jumper inside the cable reel from DIG to NAM (digital to analog).
Jumper on DIG
Put jumper on NAM only if you need to switch to
analog
** Note that the RaycoWylie system is expecting to see a short on the A2B line during normal operation.
During a two-block event, an open circuit is needed. Ensure that the A2B wires that you are using will
provide this condition.
