raycop RS2, Start, Page: 9 / 15

Dust Box Filter Detection Sensor
A safety device that prevents your purifier
from operating without the dust box filter
attached by using a sensor located on the
dust box attachment.
Dust Box Filter Washing Alert
If house dust accumulates on the dust box
filter, starts flashing red to inform you
it’s time to wash the dust box filter.
House Dust Indicator
The house dust indicator is designed
to light up during use so you can easily
check how much dust has accumulated.
This alerts you to clean the dust box
and filter.
Lock Function
A safety function to prevent your purifier
from accidentally operating by locking it
when left for about 1 minute while the
power plug is in an outlet.
Micro HEPA Filter Replacement Alert
Starts flashing in red to inform you it’s
time to replace the micro HEPA filter with
a new one.
Motor Overheating Prevention Device
If your purifier is continuously used for 30
minutes, the motor overheating prevention
device automatically stops suction to
prevent overheating the motor. This may
occur if the dust box or filter is clogged
with house dust.
Run Time Control System
You will hear 5 beeps right before your
purifier automatically stops after running
around 29 minutes.
Target Detection Sensor
A safety device that automatically turns off
the UV lamp when your purifier is moved
away from the target. The UV lamp is
automatically turned back on when your
purifier is moved close to the target again.
UV (ultraviolet light) Blocking Feature
Minimizes UV emitted to areas other than
the area being cleaned.
DE
SIG
NED FOR SAFE
TY