Raycer RAY24CBT Instruction Manual Download Page 14

 

14 

   

FUEL & OIL MIXTURE 

 

 

 

Never fill the fuel tank to the very top. 

 

Never add fuel to the tank in a closed non-ventilated area. 

 

Do not add fuel to this unit close to an open fire or sparks. 

 

Be sure to wipe off spilled fuel before attempting to start engine. 

 

Do not attempt to refuel a hot engine. 

 
Fuel used for this model is a mixture of unleaded gasoline and approved engine lubricant. When 
mixing gasoline with two-cycle engine oil, use only  gasoline which contains NO ETHANOL or 
METHANOL(Types of Alcohol) Use Branded 89 octane or higher 
Unleaded gasoline known to be of good quality. This will help to avoid possible damage to engine 
fuel lines and other engine parts. 
           
 

MIXTURE RATIO IS 40:1 

                                                                     
                                                                      GASOLINE-40PART            OIL-1 PART                 
   
                                                                    Fuel  mixture  at  the  rate  other  than  25:1  may  cause 

damage to the engine, Ensure mixture ratio is correct. 

 

FUEL

                                                      IMPORTANT 

The engine uses two-stroke fuel, a mixture    Two-stroke fuel may separate. Shake fuel   
of gasoline and 2-stroke lubricant 40:1          container thoroughly before each use. Stored   
                                                                  fuel ages. Do not mix more fuel than you 

expect to use within a month. 

 
 

GASOLINE 

Use branded 89 octane or higher unleaded   
gasoline known to be of good quality. 
 
                                                                          FUEL AND OIL MIXTURE 

STORING FUEL 

             

Store fuel only in a clean, safe, approved        Inspect fuel tank making sure that it is   
container. Check and follow local              clean and fill with fresh fuel. Use a mixture   
ordinances. on type and location of            of    40:1 
storage container. 
 
 
 

Summary of Contents for RAY24CBT























Reviews: