Take support tubes
3-D and screw
onto the four
threads on support
tubes 3- A and
then place another
four washers and
thread protection
spacers over the
threads on support
tubes 3-D.
Place your next
piece of glass onto
tubes 3-D making
sure the threads
are correctly
through the holes.
Again place
washers onto each
of the threads of
support tubes 3-D.
8
10
ASSEMBLY
NOTE:
Either columns
3-D or 3-C can be fitted
at this stage, dependent
on what configuration
suits you.
Curved edge to the front of
the stand.
1
3-D
1
1
3-A
9
5
3-D
