ASSEMBLY
Note - the spiked feet may
make slight indentations
in wooden floors or other
floor coverings, and could
cause injury.
Repeat from step 2)
onwards for the second
stand.
7
Set the speakers on the
stands and run the speaker
cable either through the
gaps at the top and bottom
of the cable cover strip, as
shown in 8A, or through the
hole in the base plate as
shown in 8B. Ensure the
speakers are balanced on
the stands.
8
6
Fit 4 spiked feet (E) into
the holes in the bottom of
the base plate. The spiked
feet are threaded, it is
necessary to screw them
into the corresponding
holes on the base plate.
The spiked feet are
optional, to provide isolation
between the stands and the
floor, as well as to provide
stability on carpet.
6
8
A
B
8
