Rawlins KaiVac 2100 Series, Operator And Parts Manual

Page: 11 / 29

Hose Cleaning
1. Unwrap vac hose and l
ay
ic on floor.
2. Suck water and air from water tank.
Lower hose end to surface of water
gulping both air and water. This
action flushes soils from line and
quickly empties water tank.
*D
ry
vac hose by connecting
hose ends to vac motor, then
discharge air into vac tank
3.Vac hose can now be wrapped onto machine.
Leave vac motor running while wrapping to
avoid water dripping from end of hose. To
completely dry hose leave vac motor running
for about 3 minutes.
4. With Dump Hose opened to floor drain,
spray inside of vac tank with clean water
moving hose in a circular pattern to insure
tank walls and float shutoff are rinsed.
1
© 2007 Kaivac, lnc. All Rights Reserved
2
Tank and Hose Cleaning
8
T: 0121 351 4444 E: sales@rawlins.co.uk W: www. rawlins.co.uk