Injustice Arcade™
10
|
P a g e
55” Cabinet Assembly
Note
: 2 people are required, and ladders are recommended. Marquee assembly is
heavy
!
4.
Place cabinet in desired floor location. Setup ladders next to the cabinet for marquee installation.
5.
Locate the marquee assembly as well as the following hardware:
a.
(12) black tamper proof Torx machine screws, ¼ - 20 thread, 1-1/2” long
b.
(12) ¼” black split lock washers
c.
(12) ¼” black flat washers
6.
Using a T-27 bit, securely mount the marquee assembly atop the cabinet as shown in the assembly
setup diagram, avoiding any pinching/crushing of the wire harness which should pass through the
access hole. Connect marquee harness to cabinet harness.
Summary of Contents for Injustice Arcade
Page 2: ......
Page 28: ......
Page 29: ...Injustice Arcade 29 P a g e Electrical and Mechanical Illustrations...
Page 56: ......
