Ravpower RP-WD03, Advanced User'S Manual

Page: 114 / 124

114
Troubl eshooti ng
If the FileHub fails to function as expected, check the list of common
problems below before consulting RAVPower representative.
Q:
Why I cannot connect to FileHub after changing the SSID password?
A: Please forget the password of the FileHub on your phone 92 . If
this doesn’t work, please reset the FileHub for a try. 120
Q: Why the network speed decreases in the bridge mode?
A: This is because it uses the same radio/frequency (2.4GHz) to accept
incoming and outgoing packets from clients as it does to forward those
packets on to the next Wi-Fi router and accept replies. So effectively you
get half the bandwidth, as each packet must go over the air twice - from
the client to the FileHub, then from the FileHub to the Wi-Fi router. This
should be the industry standard with almost all router with bridge mode.
For those who constantly use media streaming or real-time network
gaming, we instead recommend AP mode to expand the wireless
network with less impact to peak performance.
Q: Why I can’t get any internet from FileHub?
A: Firstly please note that the FileHub can create its own LAN but
without full internet access. Then please check if your FileHub is
connected to a wired or wireless network. 38