7.
Troubleshooting
Symptom: Cannot enter Command Mode on radio module
Solution #1. Verify the serial port baud rate on the modem and terminal server.
This is difficult if it is set wrong, because you cannot enter the command mode to
check it. Try all possible baud rates, and see if one of them works with the
modem.
Solution #2. Make sure that Telnet Support is enabled in the terminal server.
Symptom: Cannot transmit from Radio B
Solution #1. Verify that there is no Telnet session connected to Radio A’s port.
Solution #2. Make sure that the terminal server’s DTR mode
