Company Confidential
7
Raveon Technologies Corp.
4. Data Transmission
To transmit data, simply press a button on the interface. As soon as a full packet
of data has been generated and collected into the internal buffer of the modem,
the modem will automatically key its transmitter, and send the data over the air.
5. Debug Related Features
Bench Testing
(Must be connected to a service monitor and/or spectrum analyzer)
All debug options below are entered by pressing
ACCESS CODE
+ the following buttons:
1
Keys the unit to CW
2
Keys the unit with a square wave
3
Sends all DTMF characters sequentially
UP
Sends the DTMF character A multiple times
DOWN
Sets the access code for the unit
7 or ON/OFF
Enable/Disable Override Mode
8 + 8 + 8
Reset unit to factory defaults
When finished, any transmissions can be ended by pressing the
OFF
button alone.
Note: Unwanted characters may have been generated at this time. It is recommended to
simply press any key after using these modes to ensure unit is working as intended.
