Ravenheat HE 25 S COMPACT, Instructions For Use Installation And Servicing

Page: 30 / 67

30
Fig. 15
All joints must be sealed with the rubber seals
supplied.
It is important to put the centering spacer, supplied
with the unit, inside between the two pipes, from
the side opposite the extension’s straight end.
NOTE: A suitable support bracket (flue bracket)
is available from Ravenheat and should be used
to support the flue length at least every one
metre preferably at each joint this bracket should
be secured to wall and flue duct.
SIDE FLUE OUTLET
Fig. 14
NOTE: The position of the appliance must provide
minimum side clearances of 5mm as the
side panels do not require removing for
servicing. However, if the option is
preferred to remove the panels then a
minimum clearance of 55mm is required.