Raven viper, Installation & Operator'S Manual

Page: 82 / 182

C
HAPTER
8
74 Viper/Viper 4+ Installation & Operation Manual
15. Touch the Width field and use the on-screen keypad to enter the section width in inches [centimeters].
NOTE: ROS is capable of calculating section offsets for standard implements automatically. For standard
section configurations (e.g. sections aligned end-to-end and centered on the swath midpoint) set the
section width for each section and touch the “Calculate Offsets” button.
Section offsets may still be adjusted to customize the section configuration as necessary.
16. Touch the Wired As field and enter the appropriate “boom sense” connection or lead used to sense the section
status. Refer to the ROS Device Installation Manual, the Raven CANbus Installation Manual, or contact a local
Raven dealer for additional assistance with section connections and cabling.
17. Repeat step 13 through step 16 to set the section settings for each section in the section group. Once the
section labels, width, and wired as settings are configured, ROS may be used to automatically calculate and set
the section offsets for the group.
To automatically calculate section offsets:
1. Verify that the section width field for each section in the group has been entered correctly.
2. Touch the “Calculate Offsets” button to automatically align sections end-to-end along the swath midpoint. ROS
will calculate and set the offset values for a standard section configuration (e.g. similar to sections on a self-
propelled sprayer).
To manually configure or adjust section offsets:
1. Touch the left/right direction setting and select the appropriate offset direction.
2. Touch the left/right field and enter the offset distance.
3. Touch the fore/aft direction setting and select the appropriate offset direction.
4. Touch the fore/aft field and enter the offset distance.
MACHINE CONFIGURATION AND PROFILE SETTINGS DEFINITIONS
The following sections provide detailed information about the settings and options accessible via the Machine
panel.