Raven viper 4+, Service Manual, Page: 5 / 9

Viper 4+ Service manual I V1.0
Viper 4+ service manual-EN-V1.0 I Pag 5/ 9
2. Connect to internal
Septentrio GPS receiver
Take the following steps to make a serial
connection to the internal Septentrio GPS
receiver:
1. Connect a serial cable or USB-to-Serial
converter from your desktop PC/laptop to
the SUB-D9 connector with label
“NMEA” (Figure 6). In the Harness, In-
Cab VPR4 ISO (11158000064) the
NMEA connector is located nearby the
first DT-connector in the cable. In the
Harness, In-cab (terminal) VPR4
(SBG13711-09) the
nmea connector is
located just behind the Viper 4+ field
computer. When you use a Harness
SBG-VPR4 Adapter M12 (SBG13711-
11), use the NMEA output connector with
a NMEA cable (SBG10880) to connect.
2. Open Septentrio RxControl on your
computer. If Septentrio RxControl is not
available on your computer, download
the tool from the SBG website.
3. Go to File > Change connection (Figure
7). A new screen appears (Figure 8).
Figure 7 RxControl - Change connection
Figure 6 Serial connection to internal GPS receiver