Page 44/50
I SBG-Disc CAN-EN-Rev. A
SBGuidance Disc I Rev. A I CAN
4.5.
Configurator set-up
Copy the SBGuidance folder of the tractor that
will be used with the disc control unit. Add the
make and type of the implement to the name of
the copied folder. For example:
MF7619_Monosem.
Open SBGuidance Configurator from the
SBGuidance folder. Under Machine settings in
the SBGuidance Configurator, set up and
configure the system and guidance type for the
AUX control. Select system type “CAN” and
Guidance type “SBGuidance Disc”. On
Orientation, select “DynamIQ”.
No parameters are required on the tab page
Disc.
On the tab page Machines, enter offset A
(antenna height).
Refer to the SBGuidance Auto CAN set-up
and configuration manual for further
information on how to install SBGuidance.
4.6.
Checking orientation of DynamIQ
The orientation of the DynamIQ ISO/SGC must
be checked and set in SBGuidance at INFO >
GPS > Orientation > tab page Implement
(
).
Figure 36 DynamIQ Orientation
Figure 35 Vehicle Tuning
Summary of Contents for SBGuidance Disc
Page 2: ...Page 2 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 8: ...Page 8 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 36: ...Page 36 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 48: ...Page 48 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
